Fire Curtains2026-11-06T12:58:50+00:00

FIRE CURTAINS

Commercial Fire Curtain Systems

FIRE CURTAIN MAINTENANCE & SAFETY REQUIREMENTS

Fire Curtain Safety and Regulatory Requirements

Fire curtains help protect people and property by limiting the spread of fire between different areas of a building. When correctly specified and installed, these systems can form part of a building’s passive fire protection strategy.

In England and Wales, the Regulatory Reform (Fire Safety) Order 2005 places fire safety duties on Responsible Persons. For example, they must maintain relevant fire safety equipment in an efficient state, in effective working order and in good repair.

Meanwhile, Scotland has its own fire safety legislation. Relevant duties arise under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. However, the requirements depend on the premises and their fire safety arrangements.

Regular fire curtain inspections help identify faults that could affect performance during an emergency. Therefore, building owners and Responsible Persons should follow an appropriate maintenance programme for their systems.

When Are Fire Curtains Required?

Fire curtains can provide fire separation where permanent walls, doors or shutters may not be suitable. However, their use depends on the building design, fire strategy and relevant fire safety requirements.

For example, commercial fire curtain systems may provide suitable protection in the following environments.

Open-Plan Buildings and Large Spaces

Large open-plan areas can present challenges for fire compartmentation. These include shopping centres, atria and reception spaces. In such locations, fire curtains can help create fire-resisting barriers where the building’s fire strategy requires separation.

Protected Escape Routes

Fire curtains may also form part of a designed solution to protect escape routes, corridors and stairwells. However, their suitability depends on the required fire resistance and deployment arrangements. The design must also maintain appropriate evacuation provisions.

Alternatives to Fire Doors and Shutters

Traditional fire doors or shutters may be impractical in some buildings. For example, space limitations, access requirements or architectural features can affect their suitability. In these circumstances, a suitable fire curtain may offer an alternative where the approved fire strategy permits it.

Heritage and Historic Buildings

Historic buildings often require specialist fire protection solutions that minimise changes to original features. As a result, fire curtains may provide separation while reducing the need for permanent structural alterations.

Smoke Control Applications

Smoke curtains serve a different purpose from fire-resisting curtains. Specifically, they help contain or direct smoke as part of a wider smoke management strategy. Their performance and deployment arrangements depend on the smoke control design.

Unlike many fire curtains, smoke curtains do not necessarily descend to floor level. Instead, their final position depends on the building’s smoke control requirements.

British Standards for Fire Curtain Systems

Relevant British Standards provide guidance on fire curtain performance, application, installation and maintenance. However, the applicable requirements depend on the curtain type and its intended function. Therefore, each project should identify the appropriate standards and performance evidence.

BS 8524-1:2013 – Active Fire Curtain Assemblies

BS 8524-1:2013 specifies requirements for active fire curtain barrier assemblies. In particular, it addresses performance and testing to support appropriate fire protection applications.

BS 8524-2:2013 – Application, Installation and Maintenance

BS 8524-2:2013 provides a code of practice for active fire curtain barrier assemblies. It covers their application, installation and maintenance. Consequently, the standard helps inform system selection, installation arrangements and ongoing maintenance procedures.

Other Relevant Fire and Smoke Control Standards

Depending on the application, other standards may also be relevant. These include:

  • BS EN 1634-1: Fire resistance testing for door, shutter and openable window assemblies, and elements of building hardware, within its defined scope.
  • BS EN 12101-1: Requirements for smoke barriers used within smoke and heat control systems.

Before installation, the project team should confirm the relevant standards and evidence of performance. In addition, the selected system must suit the building’s fire strategy and intended application.

Fire Curtain Maintenance Requirements

Regular fire curtain maintenance helps identify damage, mechanical faults and control system problems. Without appropriate servicing, a curtain may fail to deploy correctly during an emergency. Therefore, ongoing maintenance plays an important role in maintaining reliable fire protection.

Maintenance arrangements should follow applicable standards, manufacturer instructions and the building’s fire risk assessment. Furthermore, a competent person should carry out specialist inspections and servicing at suitable intervals.

Fire Curtain Servicing Frequency

Six-monthly servicing is commonly specified for active fire curtain systems. However, the appropriate frequency depends on the system’s requirements and operating environment. Applicable maintenance guidance should also inform the servicing schedule.

For example, frequently operated curtains may require additional inspections. Similarly, systems exposed to increased risks of damage may need closer monitoring. Responsible Persons should also keep suitable records of inspections, servicing and corrective work.

Routine Fire Curtain Inspections and Testing

Routine checks can help identify visible damage, obstructions and operating problems between scheduled maintenance visits. In addition, appropriately instructed facilities teams may carry out suitable checks within their responsibilities.

Depending on the system, routine inspection and testing arrangements may include:

  • Checking that the curtain opening and deployment area remain clear.
  • Inspecting visible curtain fabric and components for damage.
  • Looking for obstructions around side guides and associated equipment.
  • Confirming that warning signs and operating instructions remain visible.
  • Testing curtain deployment in accordance with approved procedures.
  • Recording faults and arranging corrective maintenance where necessary.

What Does Fire Curtain Maintenance Include?

During a specialist maintenance visit, engineers assess the condition and operation of the fire curtain system. The exact checks depend on the installed equipment and manufacturer instructions. For example, maintenance may cover the following components and functions:

  • Checking curtain deployment, descent speed and alignment.
  • Inspecting side guides, rollers and mechanical components.
  • Assessing the condition and integrity of the curtain fabric.
  • Checking motor operation and associated drive mechanisms.
  • Testing battery backup and relevant power supply arrangements.
  • Examining control equipment and fire alarm interfaces.
  • Identifying faults, damage or components requiring attention.

Where a fire curtain connects to a fire alarm system, engineers should also check the relevant control and activation arrangements. As a result, they can assess whether the system responds as intended within the building’s fire strategy.

Fire Curtain Inspections and Fire Risk Assessments

A suitable fire risk assessment helps identify the fire protection measures a building needs. For example, it may consider existing fire curtains, smoke curtains and other passive fire protection features.

In addition, the assessment can highlight maintenance concerns and changes in building use. It may also identify risks that could affect fire curtain performance. Consequently, Responsible Persons can make more informed decisions about inspections, servicing and corrective action.

Professional Fire Curtain Maintenance with SS Systems

SS Systems supports businesses and organisations with fire curtain servicing, inspections and wider fire safety equipment services. Our aim is to help clients maintain reliable fire protection arrangements. We also help them understand their ongoing fire safety responsibilities.

If you need a fire risk assessment, SS Systems can discuss your requirements. Alternatively, contact our team to arrange a fire curtain or smoke curtain inspection. We can then help you identify the appropriate next steps for your premises.

Enquiry

Frequently Asked Questions About Commercial Fire Curtains

A fire curtain is a flexible, fire-resistant barrier that helps restrict the spread of fire between different areas of a building.

Many active fire curtains remain concealed above an opening during normal use. When the system receives an appropriate activation signal, the curtain descends to its intended position to help maintain fire separation.

The tested curtain system and the building’s fire safety strategy determine how the curtain operates, its fire resistance and its activation arrangements.

Fire curtains and smoke curtains perform different functions within a building’s fire safety arrangements.

A fire curtain provides a specified level of fire resistance, helping to restrict the spread of flames and heat between areas.

A smoke curtain primarily controls or directs smoke movement as part of a smoke control strategy. Depending on its purpose, it may descend only partway towards the floor.

Some systems provide both fire and smoke performance, but their tested classification must support both functions. A smoke curtain does not automatically provide fire-rated separation.

Fire curtains can help buildings maintain fire separation without permanently dividing the available space.

Common applications include shopping centres, offices, hotels, hospitals, educational buildings, atriums, open-plan areas and certain heritage properties.

Fire safety designers may also consider fire curtains for particular openings or circulation areas, depending on the building’s fire strategy and the suitability of the tested system.

A competent designer should confirm whether a fire curtain suits the proposed location.

Fire safety legislation does not require every commercial building to have fire curtains.

However, a building’s fire safety strategy, approved design or fire risk assessment may identify a need for fire-resisting separation that an appropriate fire curtain system can provide.

In England and Wales, the Regulatory Reform (Fire Safety) Order 2005 places duties on the Responsible Person to manage fire risks and maintain relevant fire safety measures. Building Regulations may also influence the design and installation of fire protection measures.

A competent fire safety professional should assess whether your premises need fire curtains.

Building managers should arrange appropriate fire curtain inspections, testing and maintenance to help ensure the systems operate correctly when needed.

The maintenance provider should establish a servicing schedule that reflects applicable standards, manufacturer instructions, the building’s fire safety strategy and the requirements of the installed system.

BS 8524-2 provides guidance on the application, installation and maintenance of active fire curtain barrier assemblies. Six-monthly specialist servicing is commonly specified for these systems, alongside appropriate routine checks. However, the exact requirements depend on the installation.

A competent specialist should investigate any faults or damage promptly.

Yes. Installers can connect many active fire curtain systems to suitable fire detection and alarm arrangements.

When the fire alarm system identifies the configured activation conditions, it can send a signal that starts the curtain’s required deployment sequence.

Depending on the design, the system may include staged descent, warning devices, obstruction detection and suitable arrangements for people using nearby escape routes.

The system designer must plan the interface and operating sequence around the building’s fire safety strategy and the specific curtain system.

In some circumstances, an appropriately specified fire curtain may provide an alternative means of fire separation where a conventional fire door, wall or shutter would be impractical.

However, fire curtains cannot automatically replace fire doors or shutters. The proposed application must meet the building’s fire safety design requirements, and the curtain’s tested performance must support its intended use.

Designers must take particular care where occupants need to pass through an opening during evacuation. A competent fire safety designer should confirm whether the arrangement is suitable.

The fire curtain system’s design determines how it responds to a power failure.

Many active systems use battery backup or fail-safe deployment arrangements so that the curtain can respond appropriately if the normal electrical supply fails.

The designer or maintenance provider should confirm the system’s precise operation during design, commissioning and maintenance. Different curtain systems may respond to power failures in different ways.

Regular inspections and maintenance help building managers identify fire curtain faults before they affect the system’s operation.

Warning signs may include:

  • Damaged fabric – Tears, excessive wear or visible deterioration.
  • Movement problems – Uneven descent, unusual noises or failure to deploy correctly.
  • Obstructions – Items or alterations that prevent the curtain from reaching its intended position.
  • Control faults – Warning indicators, power supply problems or failed activation tests.
  • Damaged components – Problems affecting guides, fixings, bottom bars or other parts of the assembly.

Report suspected defects promptly and ask a competent specialist to assess them. Do not modify or interfere with the curtain system without appropriate technical advice.

Contact SS Systems to discuss your building, existing fire curtains and any installation, inspection or maintenance requirements.

Our team can review your enquiry and discuss suitable next steps, including arranging a site visit where appropriate.

Call 03300 417 170, email sales@sssystems.co.uk or visit our Contact Us page.

Advice When Choosing and Maintaining Commercial Fire Curtains

Before installing fire curtains, review your building’s fire safety strategy and fire risk assessment to identify where you need fire separation.

Consider how people use the building, which routes they follow during evacuation and which areas need protection from fire spread.

Choose fire curtains as part of a coordinated fire protection design rather than simply because they take up less space than permanent walls or doors.

Fire curtains and smoke curtains serve different purposes. Choosing the correct system helps support effective fire protection.

Consider the following:

  • Fire curtains – Provide a specified level of fire resistance and help maintain fire separation.
  • Smoke curtains – Control or direct smoke movement as part of an appropriate smoke management strategy.
  • Combined performance – Some tested systems provide both fire resistance and smoke control, subject to their classification.
  • Required performance – The fire safety designer must establish the necessary fire resistance, smoke leakage characteristics and other performance requirements for the application.

Always check the proposed system’s test evidence, classification and approved installation arrangements before making a final selection.

Competent specialists should specify, install and maintain fire curtain systems in accordance with the standards relevant to their intended application.

BS 8524-1 and BS 8524-2 address active fire curtain barrier assemblies, while other standards may apply to smoke control or particular product classifications.

Ask the provider for appropriate evidence of testing, classification and system suitability. Check that the evidence covers the proposed dimensions, supporting construction, components and installation details.

A product’s certification does not automatically make it suitable for every opening or building.

Fire curtains must operate in a way that supports the building’s fire safety and evacuation strategy.

Important considerations include:

  • Escape routes – Check whether occupants need to pass through or near the protected opening.
  • Deployment sequence – Establish whether the design requires a single or staged descent.
  • Warning arrangements – Consider appropriate audible or visual warnings where the design specifies them.
  • Obstruction protection – Provide suitable measures to address people or objects in the curtain’s path.
  • Accessibility – Consider people who may need additional assistance during evacuation.
  • Emergency procedures – Ensure staff understand what happens when the curtain activates.

The tested curtain system and the building’s fire safety strategy determine which safeguards are appropriate. Never assume a fire curtain can safely replace a designated escape door.

Many active fire curtains receive activation signals from fire detection and alarm equipment. However, the correct arrangements depend on the installation.

Discuss the required interfaces with the fire alarm designer and curtain supplier before installation.

The design should address activation conditions, power failure, deployment behaviour and any necessary coordination with smoke ventilation or other building systems.

During testing and commissioning, the responsible specialists should confirm that the complete arrangement operates as intended.

Fire curtains are safety-critical systems and need appropriate inspection, testing and servicing throughout their working life.

Your maintenance programme should include:

  • Routine checks – Keep the deployment area clear and look for visible damage.
  • Operational testing – Check that the curtain deploys and operates as intended.
  • Fabric and components – Inspect the curtain, guides, fixings, bottom bar and accessible mechanisms.
  • Controls and power supplies – Check the control equipment, relevant interfaces and backup arrangements.
  • Specialist servicing – Arrange maintenance at intervals that reflect applicable standards and manufacturer requirements.
  • Corrective action – Report defects and arrange suitable repairs without unnecessary delay.

Six-monthly specialist servicing is commonly specified for active fire curtain systems. Your maintenance provider should confirm the appropriate schedule for your particular installation.

Obstructions or unauthorised alterations can prevent a fire curtain from performing its intended function.

Good housekeeping measures include:

  • Keep the curtain’s deployment path clear of furniture, stock and equipment.
  • Check that temporary displays and signage do not obstruct movement.
  • Report damaged fabric, guides or other visible components.
  • Avoid unauthorised alterations to the curtain, controls or surrounding construction.
  • Tell contractors about concealed fire curtains before they carry out nearby work.

Include these checks in your routine building safety inspections and report concerns to the person responsible for fire safety.

Choose a provider with relevant experience in installing or maintaining fire curtain systems.

Ask about the types of systems the provider works with, their technical competence, applicable certifications and arrangements for servicing and repairs.

The provider should explain the proposed system’s suitability, how it operates and what documentation you will receive following installation or maintenance.

Where fire curtains form part of a wider fire safety strategy, the project may also require coordination between fire alarm specialists, building managers and fire risk assessment professionals.

Bonus Tip: Keep a record of your fire curtain locations, system specifications, commissioning documents and maintenance history. This makes it easier to arrange servicing, identify recurring faults and assess whether building alterations could affect the curtains’ performance.

One Engineer With Multiple Disciplines & A More Joined-Up Approach

By |September 28th, 2026|Categories: News|Tags: , , , , , , , , |

Modern buildings increasingly rely on multiple fire, life-safety and security systems working together. From fire alarms and emergency systems to CCTV, access control and intruder detection, ensuring these technologies operate effectively requires more than simply understanding each system in isolation. A multi-disciplined fire and security engineer brings knowledge and skills across both fire and security systems, providing a more coordinated approach to installation, integration, servicing and ongoing support.

OUR PARTNERS

SS Systems partner with leading UK based manufacturers to ensure that the fire detection and alarm systems we provide are at the forefront of current technology, along with being the most reliable our industry has to offer.

Externally Monitored to Ensure that we meet a High Standard of Service.

As members of the SSAIB (Security Systems and Alarms Inspection Board), We maintain service records and monitor our success. The SSAIB, is a leading certification body for organisations providing security systems and services, fire detection alarm systems, and monitoring services. So, you can be confident that we strive to provide our clients with a reliable and professional level of service.

Go to Top