Portable Appliance Testing (PAT) Testing
Commercial Portable Appliance Testing (PAT) Testing
When a PAT test (Portable Appliance Testing) is undertaken in the UK, it involves the examination and testing of electrical appliances to ensure they are safe to use.
When PAT test (Portable Appliance Testing) is undertaken in the UK, it involves the examination and testing of electrical appliances to ensure they are safe to use. This is part of a broader electrical safety regime, particularly in workplaces and rental properties.
What is included in a PAT Test?
PAT testing typically consists of three main stages:
1. Visual Inspection
A thorough visual check to spot obvious signs of damage or misuse:
- Damaged plugs or casings.
- Loose wires or exposed conductors.
- Signs of overheating (discolouration, melting).
- Cable condition (e.g., fraying, crushing).
- Correctly wired and fused plugs.
- Equipment suitability for environment (e.g. IP rating for wet areas).
2. Electrical Testing
This depends on the class of appliance (Class I, II, or III), but may include:
- Damaged plugs or casings.
- Loose wires or exposed conductors.
- Signs of overheating (discolouration, melting).
- Cable condition (e.g., fraying, crushing).
- Correctly wired and fused plugs.
- Equipment suitability for environment (e.g. IP rating for wet areas).
Some devices like Class II appliances (double insulated) won’t need an earth test.
3. Labelling & Documentation
- “Pass” or “Fail” label with date, tester ID, and retest date (optional).
- Log of test results (manual or digital).
- Certificate or report (for compliance records).
Standards that Govern PAT Testing in the UK
PAT testing in the UK is not specifically required by a single law but is covered under several Health & Safety regulations. Key standards and regulations include:
Key Legislation:
- Electricity at Work Regulations 1989 – Requires that electrical equipment is maintained in a safe condition.
- Health and Safety at Work Act 1974 – Employers must ensure the safety of employees and the public.
- Provision and Use of Work Equipment Regulations 1998 (PUWER) – Equipment must be suitable and safe for use.
- Management of Health and Safety at Work Regulations 1999 – Risk assessments must be carried out.
Standards and Guidance:
- IET Code of Practice for In-Service Inspection and Testing of Electrical Equipment – The main guidance document for PAT testing procedures in the UK (currently 5th Edition, published in 2020).
- BS EN 50699:2020 – “Recurrent Tests of Electrical Equipment” – Supports the IET Code of Practice, focusing on periodic testing.
- BS 7671 (IET Wiring Regulations) – Electrical installation regulations – While more focused on fixed wiring, some crossover with portable appliances exists.
Equipment Commonly PAT Tested
- Computers, monitors, printers.
- Kettles, microwaves, toasters.
- Extension leads.
- Power tools.
- Chargers and adaptors.
How Often Should PAT Testing Be Done?
There is no fixed legal interval, but frequency should be based on:
- Risk assessment.
- Type of equipment.
- Usage environment.
- Manufacturer’s recommendations.
Care Home Provider Fined £120,000 For Fire Safety Breaches
A care home operator and its Managing Director have been sentenced following multiple fire safety violations at a Nottingham care facility. Both the company and its representatives pleaded guilty to several offences under the Regulatory Reform (Fire Safety) Order 2005. The Managing Director received a nine-month suspended prison sentence and was ordered to complete 150 hours of unpaid work within 12 months. The company was fined £120,000 and, along with the Director, ordered to pay over £20,000 in prosecution costs.
Fire Service Issues Safety Warning Ahead of UK Disposable Vape Ban
With the UK set to ban disposable vapes, Essex County Fire and Rescue Service (ECFRS) is urging users to be vigilant about fire safety, especially as more people switch to rechargeable devices. In the UK, all disposable vapes will be illegal to sell, supply, or possess for sale or supply from June 1, 2025. This ban applies to all retailers, including high street and online shops, and also healthcare and stop smoking services. The ban covers both nicotine and non-nicotine disposable vapes.
Non Domestic Fire Detection & Fire Alarm Systems BS 5839-1:2025 Updated
The new BS 5839-1:2025 standard is now live, offering critical updates to the design, installation, commissioning, and maintenance of fire detection and fire alarm systems in non-domestic premises. This latest edition replaces BS 5839-1:2017 and reflects evolving industry best practices, regulatory expectations, and technological advancements.
Externally Monitored to Ensure that we meet a High Standard of Service.
As members of the SSAIB (Security Systems and Alarms Inspection Board), We maintain service records and monitor our success. The SSAIB, is a leading certification body for organisations providing security systems and services, fire detection alarm systems, and monitoring services. So, you can be confident that we strive to provide our clients with a reliable and professional level of service.
